With the QCP-Stick you can operate the PINE R controller with a QC3.0 capable powerbank. The stick can be easily connected to a corresponding USB socket of the powerbank and then provides the required 12V via a DC plug to supply the PINE R controller with voltage.
Only a few powerbanks have a 12V DC connector. The QCP-Stick 12V is a variant with which motion controllers or other devices that require 12V can be operated on a QC3.0 capable powerbank.
With powerbanks with more power and several QC3.0 capable USB ports, two QCCP/QCP-Sticks can be used simultaneously. This makes it possible to supply a camera as well as a motion controller with a mobile powerbank.
For indoor use, a QC3.0 capable USB charger can also be used instead of the powerbank.
The QCP-Stick signals the status of the adapter via an LED. This LED is switched off after approx. 2 minutes of stable operation in order not to disturb especially during night shots.
The stick is equipped with a USB-A plug. For connection to a USB-C socket, a standard USB-OTG adapter (not included) is required.
The QCP-Stick is equipped with a DC plug 5.5×2.1mm for the connection to the motion controller. This is simply connected to the DC port of the PINE R controller.
- Temperature Range: -20 ° C – + 40 ° C
- Input Voltage: 5-12V via USB-A (QC3.0)
- Output Voltage: 12V via DC Plug 5.5×2.1mm
- Output Current: 2A
- Dimensions: 53x18x10mm (LxWxH)
- Cable Length: approx. 100 cm