1. Home
  2. Docs
  3. Online Manuals
  4. PINE Controller
  5. Connections
  6. Cameras

Cameras

All cameras that can be triggered with a so-called “trigger cable” can be connected. Cables from other manufacturers can also be used. On the controller side, these cables must have a 2.5mm 3-pin TRS plug.

The following cables, which are compatible with the specified cameras, are available as accessories:

 

Type Camera
E3 For Canon:
G10/G11/G12/G15/G1X/G1X II/T1i/T2i/T3i/T3/T4i/T5i/450D/500D/550D/600D/650D/700D/70D/750D/760D/800D/80D/100D/
60D/77D/M6/M5/400D/350D/300D/1300D/1200D/1100D/1000D/SX50/SX60
N3 For Canon:
7D/7DII/6D/50D/5DII/5DIII/5D/5D4/5DS/40D/30D/20D/10D/1D/1DS/1DX/1Ds Mark II/1Ds Mark III/1Ds Mark IV/
EOS-1V/EOS-3
DC0 For Nikon:
D1/D1H/D1X/D2/D2H/D2X/D3/D3s/D3x/D4/D5/D100/D200/D300/D300s/D500/D700/D800/D800e/D810/F100/F90/F90X/N90s/
F6/F5
For Fujifilm: S3 Pro/S5 Pro
For Kodak: DCS-14N
DC2 For Nikon:
D7500/D750/D7200/D7100/D7000/D610/D600/D5600/D5500/D5300/D5200/D5100/ D5000/D3300/D3200/D3100/D90/DF/
P7700/P7800/coolpix A
S1 For Sony:
a900/a850/a800/a700/a580/a560/a550/a500/a450/a400/a350/a300/a200/a100/a99/ a77/a65/ a57/a55/a35/a33/a77M2/a99M2
For Konica Minolta: DIMAGE a2/a1/9/7Hi/7i/7/5/4/3/DYNAX 7D/5D
S2 For Sony:
a9/a7/a7R/a7S/a7SII/a7R II/a6500/a6300/a6000/a5100/a5000/a3000/HX300/HX50/
HX60/RX100 II/RX100 III/RX100M4/RX100M5/a58/NEX-3N
L1 For Panasonic DMC:
FZ50/FZ50K/FZ50S/FZ30/FZ30K/FZ20/FZ20K/FZ20S/FZ300/FZ200/FZ150/FZ100/FZ1000/FZ2000/FZ2500/G85H/G85/G10/G7/
G6/G5/G3/G2/G1/GH4A/GH4/GX8/GX7/GX1/GH3/GH2/GH1/GF1/LC-1/L1/L10/DC-GH5
For Leica: DIGILUX2/DIGILUX3
UC1 For Olympus:
E-620/E-600/E-550/E-520/E-510/E-450/E-420/E-410/E-100/E-30/E-M10/E-M10II/E-M5/E-M5II/E-M1/E-PM1/E-PM2/PEN-F/
E-PL8/E-PL7/E-PL6/E-PL5/E-PL3/E-PL2/E-P5/E-P3/E-P2/E-P1
SP: SP-590UZ/570UZ/565UZ/560UZ/550UZ/510UZ/810UZ/SZ-300MR/SZ-20/SZ-11/XZ-1
E2 For Fujifilm:
X-M1/X100T/X100F/X-T20/X-T2/X-T1/X-T10/X-E2/X-A1/X-A2/X-A3/X-A10/X70/X30/GFX50S/XQ1/XQ2/FinePix S1/X-PRO2
Was this article helpful to you? Yes No

How can we help?